DTC51460 PRODUCT CATALOGUE PageTurn - Flipbook - Page 189
Maintenance
Nutlock
•
•
•
•
Prevents shock and vibration
loosening and leakage on all types
of metal fasteners
Designed for locking and sealing,
Nut Lock withstands harsh
environments yet is removable
with hand tools
Strength: Medium
Gap Fill: 0.1 mm
Loctite 243 Threadlock Medium
Strength Oil Tolerant
•
•
•
•
•
Prevents loosening on vibrating
assemblies, e.g. pumps, gear
boxes or presses
Works on all metals, including
passive substrates (e.g. stainless
steel, aluminium, plated surfaces)
Proven to tolerate minor
contamination by industrial
oils, e.g. engine oils, corrosion
prevention oils and cutting 昀氀uids
Permits disassembly with hand
tools for servicing
P1 NSF Reg. No.: 123000
Part No Description Unit
MVC341 10ml
5
MVC301 50ml
1
Part No
LOC243/10
LOC243/50
Studlock
Loctite 270
High Strength
Studlock
•
Locks and seals studs and bolts
which do not normally need
dismantling
•
•
•
•
•
•
Unit
10ml
50ml
High-strength
general
threadlocker
for maximum
ef昀椀cacy
Prevents
loosening on
vibrating assemblies, e.g. pumps, gear boxes or presses
Works on all metals, including passive substrates (e.g. stainless
steel, aluminium, plated surfaces)
Proven to be tolerant of minor contamination due to industrial
oils, e.g. engine oils, corrosion prevention oils and cutting 昀氀uids
Permits disassembly with hand tools
Can be disassembled by heating to 300°C
Part No Description Unit
MVC342 10ml
5
MVC302 50ml
1
Part No
LOC270/10
LOC270/50
Bearing Fit Universal Retainer
Retainer High Strength
•
•
•
•
•
•
•
High-strength general
threadlocker for maximum
ef昀椀cacy
Prevents loosening on vibrating
assemblies, e.g. pumps, gear
boxes or presses
Works on all metals, including
passive substrates (e.g. stainless
steel, aluminium, plated surfaces)
Proven to be tolerant of minor
contamination due to industrial
oils, e.g. engine oils, corrosion
prevention oils and cutting 昀氀uids
Permits disassembly with hand
tools
Can be disassembled by heating
to 300°C
Part No Unit
MVC303 50ml
023 8025 1100
•
•
•
•
•
Unit
10ml
50ml
Provides high strength retention
under cyclic loading
Will retain full strength and not
suffer fatigue under load stress,
as well as bene昀椀ting from low
corrosivity.
Strength: High
Gap Fill: 0.20 mm
Full cure time 24 hours
50ml
Part No Unit
MVC304 50ml
189
